PQC-Enabled MCX N94T, N54T, N53T, N52T, N55T and N24T: Low-Power Dual-Core Arm® Cortex®-M33 MCUs with Accelerators and Advanced Security

点击图片以展开

框图

选择框图:

MCX N94T MCUs

MCX N24T MCUs

MCX N55T MCUs

MCX-N55T Block Diagram

MCX N54T MCUs

MCX N54T MCUs

MCX N53T MCUs

MCX N53T MCUs

MCX N52T MCUs

MCX N52T MCUs

MCX N24T MCUs

MCX N24T MCUs

Features

General Features

  • Dual Arm Cortex-M33 150 MHz with 618 CoreMark (4.12 CoreMark/MHz) for each core
  • 4.8 GOPs edge AI/ML acceleration with NPU
  • Platform Security with EdgeLock® Secure Enclave, Core Profile
  • -40 °C to +125 °C temperature range
  • Down to 57 μA/MHz active current, 6 μA Power down mode with RTC enabled and 512 kB SRAM retention, 2 μA Deep Power-down mode with RTC active and 32 kB SRAM

Cores

  • Primary: Arm® 32-bit Cortex®-M33 CPU with TrustZone®, MPU, FPU, SIMD, ETM and CTI
  • Secondary: Arm® 32-bit Cortex®-M33 CPU except N24T

Processing Accelerators

  • DSP Accelerator (PowerQUAD, with Co-Processor interface)
  • SmartDMA (co-processor for applications such as parallel camera interface and keypad scanning)
  • eIQ® Neutron N1-16 Neural Processing Unit
  • Power Line Communications (PLC) Controller

Memory

  • Up to 2 MB (2 x 1MB Bank) on chip Flash
    • Supporting Flash Swap and Read While Write
  • Cache Engine with 16 kB RAM
  • Up to 512 kB RAM, configurable as up to 416 kB with ECC (support single bit correction two bits detection)
    • Up to 4x 8 kB ECC RAM can be retained down to VBAT mode
  • FlexSPI with 16 kB cache supporting XIP, Octal/Quad SPI flash, HyperFlash, HyperRAM, Xccela memory types

Peripherals

  • Analog
    • 4x 16bit ADC
    • Each ADC can be used as two single end input ADC, or one differential input ADC
      • Up to 2 Msps in 16bit mode and 3.3 Msps in 12bit mode
    • Integrated temperature sensor connected per ADC
    • Three high-speed comparators with 17 input pins and 8-bit DAC as internal reference
      • 2x CMP is functional down to Deep Power Down mode
    • Two 12-bit DAC with sample rates of up to 1.0 MSample/sec
    • One 14-bit DAC with sample rates of up to 10 MSample/sec
    • Three OpAmps can be configured to:
      • Programmable Gain Amplifier
      • Differential Amplifier
      • Instrument Amplifier
      • Transconductance Amplifier
    • Highly accurate VREF ±0.15 % and 15 ppm/deg C drift
  • Timers
    • Five 32-bit standard general-purpose asynchronous timers/counters, which support up to four capture inputs and four compare outputs, PWM mode and external count input. Specific timer events can be selected to generate DMA requests.
    • SCTimer/PWM
    • LPTimer
    • Frequency measurement timer
    • Multi-Rate Timer
    • Windowed Watchdog Timer
    • RTC with calendar
    • Micro Timer
    • OS Event Timer
  • Communication interfaces
    • USB high-speed (Host/Device) with on-chip HS PHY
    • USB full-speed (Host/Device) with on-chip FS PHY, USB Device
    • uSDHC (Micro SD High Speed Card Interface)
    • 10x LP Flexcomms each supporting SPI, I2C, UART
    • 2x FlexCAN with FD, 2x I3Cs, 2x SAI
    • 1x Ethernet with QoS
    • 1x FlexIO programmable as a variety of serial and parallel interfaces, including, but not limited to Display Driver and camera interface
    • 2x EVM Smart Card Interfaces
    • Programmable Logic Unit (PLU)
  • Motor Control Subsystem
    • 2x eFlexPWM each with 4 sub-modules, providing 12 PWM outputs
    • 2x Quadrature Encoder/Decoder (ENC)
    • 1x Event Generator (AND/OR/INVERT) module support up to 8 output trigger
    • SINC Filter Module (3rd order, 5ch, break signals connections to PWM)

Security

  • EdgeLock® Secure Enclave, Core Profile (ELS)
    • AES-256, SHA-2, RNG
    • ECC-256 (ECDSA, ECDH)
  • EdgeLock® Accelerator (Public Key Cryptography)
  • Platform Security with provisioning and lifecycle management ready with EdgeLock 2GO
  • SRAM PUF for RoT Key
  • PRINCE On The Fly Encrypt/Decrypt for internal and external Flash
  • Protected Flash Region (PFR)
  • DICE and UID and Debug authentication
  • 2x Code Watchdog
  • Tamper Detect
    • Eight tamper pins
    • Active and passive tamper pin detect
    • Voltage tamper detect
    • Temperature tamper detect
    • Clock tamper detect
  • Hybrid Secure Boot Mode (Post-Quantum Secure asymmetric boot with optional fast PQC-safe symmetric mode)

Packaging

  • VFBGA184, 9x9 mm and HLQFP100, 14x14 mm

Software and Tools

  • MCUXpresso Config Tools – A comprehensive suite of system configuration tools, including pins, clocks, SDK builder and more
  • MCUXpresso SDK – An open-source software development kit (SDK) built specifically for your processor and evaluation board selections
  • MCUXpresso IDE – An easy-to-use integrated development environment (IDE) for creating, building, debugging, and optimizing your application
  • RTOS
  • Zephyr
  • FreeRTOS
  • Azure

购买/参数

‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌
‌
‌

‌
‌
‌
‌
‌
‌

文档

快速参考恩智浦 文档类别

1-10 / 47 文件

紧凑列表

应用笔记 (45)

设计文件