System Basis Chip with CAN High-Speed and LIN Interface

  • 建议不要在新设计中使用该软件
  • 建议不要在新设计中使用本页介绍的产品。




Simplified Application Drawing

NXP<sup>&#174;</sup> MC34903 Internal Block Diagram - 30295


  • Voltage regulator for MCU, 5.0 or 3.3 V, part number selectable, with possibility of usage external PNP to extend current capability and share power dissipation
  • Very low quiescent current in LP modes
  • Fully protected embedded 5.0 V regulator for the CAN driver
  • Multiple undervoltage detections to address various MCU specifications and system operation modes
  • Auxiliary 5.0 or 3.3 V SPI configurable regulator, for additional ICs, with overcurrent detection and undervoltage protection
  • MUX output pin for device internal analog signal monitoring and power supply monitoring
  • Advanced SPI, MCU, ECU power supply, and critical pins diagnostics and monitoring
  • Multiple wake-up sources in LP modes: CAN or LIN bus, I/O transition, automatic timer, SPI message, and VDD overcurrent detection
  • ISO11898-5 high-speed CAN interface compatibility for baud rates of 40 kb/s to 1.0 Mb/s
  • Scalable product family of devices ranging from 0 to 1 LIN, compatible to J2602-2 and LIN 2.1

部件编号包含: MC34903CP3EK, MC34903CP5EK, MC34903CS3EK, MC34903CS5EK.


快速参考 文档类别.

4 文件



3 硬件