暖通空调(HVAC)
概述
产品规格
选择一个图表
HVAC
微控制器(MCU)
- S32K1通用微控制器
- S12XS : S12XS汽车和工业微控制器(MCU)
- S12P : S12P汽车和工业微控制器(MCU)
- S12G : 超可靠的S12G通用汽车和工业微控制器
系统基础芯片(SBC)
- MC33742 : 带有增强型高速CAN收发器的SBC
- MC33904 : 带有高速CAN接口的第二代系统基础芯片
- MC33905 : 带高速CAN和LIN的第二代SBC
- MC33910 : LIN系统基础芯片，带有2个60 mA的高边驱动器
- MC33911 : 带DC电机预驱动器的LIN系统基础芯片
- MC33912 : 带DC电动机预驱动器和电流检测的LIN SBC
CAN接口
- MC33897 : 单线CAN收发器
LIN接口
- TJA1021 : LIN 2.1/SAE J2602收发器
- MC33662 : LIN2.1 / SAEJ2602-2，LIN物理层
- MM908E626 : 8位MCU，带集成Vreg、步进电机、LIN Phy
开关监控
电机控制
高边开关
传感器
- 传感器 : 传感器
HVAC
设计资源
文件 ( 5 )
文件
应用说明 ( 5 )
-
Using the Touch Screen Controller on the MCF5227x
The need for graphical user interfaces in industrial and consumer applications is steadily increasing. For instance, LCDs are now on appliances such as washers, dryers, refrigerators, and stoves, allowing enhanced human control. Security and HVAC control systems are other examples of applications that require advanced graphical display interfaces to enable human control of the various system functions. Along with the LCD, the use of touch screens is also increasing. To address this need, NXP®
-
Flap Motor Control Based On HVAC Platform
This application note describes Flap Motor Control Based On HVAC Platform
-
AN4618: Sensorless BLDC Motor Control Using S12G240 Based on HVAC Platform – Application Note
Describing the design of a three-phase sensorless BLDC motor drive with back-EMF zero-crossing based on the MC9S12G240 MCU that can be effectively used for motor control applications.
-
AN4617: Human-Machine Interface (HMI) Design Using HVAC Platform – Application Note
Outlining how to implement a human-machine interface (HMI) 3x3 matrix keypad, two encoder type knobs, and a segment LCD in the heating, ventilation, and air conditioning (HVAC) platform solution based on the MC9S08LG32 MCU communicating via SPI with an MC9S12G240 MCU.