LPC8N04 8 MHz _Arm® Cortex®-M0+_32位微控制器(MCU)

点击播放视频

LPC8N04是一款高性价比MCU，适用于带集成NFC连接的嵌入式应用，是一款入门级数据连接解决方案。LPC8N04 MCU包含多种功能，包括多种省电模式和高达8 MHz的可选CPU频率，旨在实现超低功耗。LPC8N04 MCU的外设组合包括32 kB闪存，8 kB SRAM，4 kB EEPROM，一个I2C，一个SPI/SSP，以及多达12个通用I/O引脚。

数据手册

应用笔记

产品详情

框图

LPC8N04 MCU Block Diagram

获取框图PDF

特征

系统

Arm^{^®} Cortex^®-M0+内核，工作频率高达8 MHz
嵌套向量中断控制器(NVIC)
Arm串行线调试(SWD)
系统节拍定时器
IC复位输入

存储器

32 kB片内闪存编程存储器
8 kB SRAM
4 kB片上EEPROM

数字外设

多达12个通用I/O (GPIO)针脚，带可配置上拉/下拉电阻和中继器模式。
GPIO引脚可用作边沿和电平触发中断源
四个GPIO引脚上的大电流驱动器/汇点电流(20 mA)
两个I²C总线引脚上的大电流驱动器/汇点电流(20 mA)
可编程的看门狗定时器(WDT)
实时时钟(RTC)定时器

通信接口

NFC/RFID ISO 14443 A型接口
串行I2C总线完全支持I2C规范和快速模式(数据传输速率为400Mbit/s)，支持多地址识别功能和监控模式
SPI/SSP接口

时钟生成

8 MHz内部RC振荡器，将精度校准到2 %，可用于系统时钟
定时器振荡器工作频率为32 kHz，可链接到RTC定时器单元

功率控制

支持1.72 V至3.6 V外部电压
LPC8N04也可以通过NFC场域供电
可通过NFC激活
集成的电源管理单元(PMU)，用于多功能控制功耗
Arm Cortex-M0+有四种低功耗模式：睡眠模式、深度睡眠模式、深度掉电模式和电池关闭模式
每个模拟外设的功率门控，适合超低功耗运行
3.0 V无电池模式下IC电流消耗低于50 nA
上电复位(POR)

其他特性

温度传感器，精度为+/- 1.5°C，工作温度为
- 40°C至85°C
可用作芯片识别的唯一序列号

文档

快速参考文档类别.

1-5 / 10 文件

^数据手册
LPC8N04 32-bit Arm^® Cortex^®-M0+ microcontroller

PDF版本 1.4Jun 12, 20181.2 MBLPC8N04英语
^应用笔记
AN1902: Assembly Guidelines for QFN and SON Packages Application Note

PDF版本 9.0Mar 30, 20219.3 MBAN1902英语
^应用笔记
NTAG Antenna Design Guide

ZIP版本 1.8Oct 23, 20181.2 MBAN11276英语
^应用笔记
LPC8N04: Encrypted Over the Air (OTA) Firmware update using NFC

ZIP版本 1.0Jun 12, 20181.3 MBTN00040英语
^用户指南
LPC8N04 User manual

PDF版本 1.3Jun 21, 20184.2 MBUM11074英语
请登录
^用户指南
User Manual for LPC8N04 Development Board

PDF版本 1.1Jan 12, 20182.0 MBUM11082英语
请登录
^勘误表
LPC8N04 Errata Sheet

PDF版本 1.1Jun 12, 2018104.1 KBES_LPC8N04英语
^简介
恩智浦®价格适宜的入门级MCU

PDF版本 0Jul 20, 20213.0 MBLPC800FS中文, 英语, 日本語
^简介
LPC8N04 MCUs with Integrated NFC Technology

PDF版本 1Oct 16, 2017291.9 KBLPC8N04FS英语
^白皮书
LPC8N04NFCWP Whitepaper

PDF版本 0Apr 3, 2018441.3 KBLPC8N04NFCWP英语

展开

设计资源

硬件

1-5 / 7 硬件

^{评估/开发板与系统}
面向LPC8N04 MCU的LPC8N04开发板亮点

OM40002
^{仿真器、探测器和编程器}
JTAG/SWD硬件调试器

MCU-LINK
^{仿真器、探测器和编程器}
LPC-Link2

OM13054
其他可用硬件. 查看我们的精选合作伙伴解决方案.
^{仿真器、探测器和编程器}
MCU-Link Pro硬件调试器

MCU-LINK-PRO
^{仿真器、探测器和编程器}
Universal Multilink FX高速开发接口

U-MULTILINK-FX
^{评估/开发板与系统}
MPC5646C器件和目标适配器

MPC5646C-DB
^参考设计
LPC8N04 MCU-based IoT Sensor Node with Integrated NFC

IoT-Sensor-Node-with-Integrated-NFC

展开

1-5 / 25 硬件

^{硬件测试配件和调试器}
J-Link PLUS

JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in t...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Arm ULINKpro

The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique strea...

By Arm Platinum 合作伙伴
^{硬件测试配件和调试器}
J-Link EDU

The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
J-Link BASE

Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other ...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher Compact

Flasher Compact is the compact twin to the Flasher PRO, primarily designed for installation into production rigs or automated test equipment (ATE) where production space ...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher ARM

In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
TRACE32 JTAG/SWD Debugger for ARM已更新

Lauterbach is making world class microprocessor development tools since 1979. TRACE32 debug and real-time trace solutions support the whole range of NXP processors.

By Lauterbach Gold 合作伙伴
^{硬件测试配件和调试器}
CYCLONE FX

Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debug, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Sta...

By P & E Microcomputer Systems, Inc Gold 合作伙伴
^{硬件测试配件和调试器}
I-jet

I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is full...

By IAR Platinum 合作伙伴
^{硬件测试配件和调试器}
Arm ULINKplus

ULINKplus combines isolated debug connection, power measurement, and I/O for test automation. It gives you visibility to function, timing, and power consumption of your e...

By Arm Platinum 合作伙伴
^{硬件测试配件和调试器}
USB Multilink Universal FX

Multilink Universal FX is a high-speed,BDM/JTAG debug probe for Kinetis, LPC, S32, MPC5xxx, MPC5xx/8xx, ColdFire, HC(S)12(X), S12Z, HCS08, RS08, DSCdevices. Supports SWO ...

By P & E Microcomputer Systems, Inc Gold 合作伙伴
^{硬件测试配件和调试器}
J-Link PRO

J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This ...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Click Shields for NXP boards

To enable faster and easier use of Click boards on NXP boards without mikroBUS socket Mikroe developed several adapters to make it easier for you to use them.

By Mikroe Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher ATE

Flasher ATE is perfectly suited for high volume mass production environments.

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher Secure

Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the program...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher Hub

The Flasher Hub controls multiple Flasher Compacts so that they program simultaneously. Up to 24 Flashers can be connected to create a single, powerful gang programmer fo...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
J-Trace PRO Cortex-M

J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data tran...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
J-Link ULTRA+

Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed ...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
CYCLONE LC

Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-control...

By P & E Microcomputer Systems, Inc Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher Portable PLUS

The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-c...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
J-Trace PRO Cortex

J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
J-Link WiFi

JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in ...

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
USB Multilink Universal

USB Multilink Universal is an all-in-one BDM/JTAG debug probe Kinetis, LPC, i.MX RT, S32, HCS08, HC(S)12(X), S12Z, RS08, ColdFire V1/+V1, ColdFire V2-4, MPC5xxx, DSC. Sup...

By P & E Microcomputer Systems, Inc Gold 合作伙伴
^{硬件测试配件和调试器}
Flasher PRO

Flasher PRO is SEGGER’s “almost-anything” flash programmer for microcontrollers, SoCs, and (Q)SPI flashes.

By SEGGER Microcontroller GmbH Gold 合作伙伴
^{硬件测试配件和调试器}
Arm DSTREAM

The Arm DSTREAM family of high performance debug and trace probes enable Arm Development Studio to debug all Arm-based devices through a variety of interfaces.

By Arm Platinum 合作伙伴

展开

查找支持此产品的所有合作伙伴，请参阅合作伙伴市场.

工程服务

如需恩智浦直接支持，请参阅工程服务.

1-5 / 9 工程服务

^{独立设计公司(IDH)}
Embedded firmware consulting

By Embedded Systems Academy, Inc. GoldHQ: San Jose, 美国支持地区: 亚洲, 欧洲, 美洲
^{独立设计公司(IDH)}
Design Services

By Embedded Artists AB GoldHQ: Malmö, 瑞典支持地区: 欧洲
^{独立设计公司(IDH)}
NFC hardware design review and consulting

By GMMC GmbH GoldHQ: Graz, 奥地利支持地区: 欧洲
^{独立设计公司(IDH)}
Debug Tool development

By Ashling Microsystems GoldHQ: Limerick, 爱尔兰支持地区: 欧洲
^{独立设计公司(IDH)}
Graphic Design

By LVGL Kft GoldHQ: Budapest, 匈牙利支持地区: 欧洲
^{独立设计公司(IDH)}
Secure Hardware design

By MobileKnowledge GoldHQ: Barcelona, 西班牙支持地区: 欧洲
^{独立设计公司(IDH)}
IDE development

By Ashling Microsystems GoldHQ: Limerick, 爱尔兰支持地区: 欧洲
^{独立设计公司(IDH)}
Embedded software development

By MobileKnowledge GoldHQ: Barcelona, 西班牙支持地区: 欧洲
^{独立设计公司(IDH)}
e2e System security design

By MobileKnowledge GoldHQ: Barcelona, 西班牙支持地区: 欧洲

展开

查找支持此产品的所有合作伙伴，请参阅合作伙伴市场.

培训

3 培训

^点播培训
Optimizing a Constrained Embedded Application Using Arm Keil uVision Tools

28 minEnglish
请登录

^点播培训
LPC80x Series Introduction Part 3 | Get Started fast with this comprehensive Enablement offering for LPC800 MCUs

56 minEnglish 级别: 初级
请登录

^点播培训
Part 4: Got NFC? LPC8N04 Does - Learn how to leverage this feature in your next design

45 minEnglish
请登录

基于Arm® Cortex®-M0+内核的高性价比微控制器(MCU)

产品详情

框图

LPC8N04 MCU Block Diagram

特征

系统

存储器

数字外设

通信接口

时钟生成

功率控制

其他特性

应用

移动设备

文档

过滤方式

设计资源

硬件

筛选条件

面向LPC8N04 MCU的LPC8N04开发板亮点

筛选条件

TRACE32 JTAG/SWD Debugger for ARM已更新

软件

过滤方式

MCUXpresso软件开发套件（SDK）亮点

LPC8N04 Board Support Package (MCUXpresso IDE)

LPC8N04 Board Support Package Keil and IAR

LPC8N04 NFC Demo (Android version)

LPC8N04 NFC Demo source code (iOS)

MCU-Link installer for Windows (V2.263)

筛选条件

工程服务

过滤方式

培训

过滤方式

过滤方式

支持

您需要什么帮助?

推荐社区

推荐链接

基于Arm^® Cortex^®-M0+内核的高性价比微控制器(MCU)