设计文件
4 设计文件
-
模型
IBIS models for LPC15xx
-
模型
BSDL for LPC1500
-
符号和尺寸
LPC15xx Allegro footprints
-
符号和尺寸
LPC15xx ORCAD footprints
The LPC1500 microcontroller series are optimized for fast, easy, and high-precision motor control and incorporate all the features required for high-accuracy sensored and sensorless motor control, enabling simultaneous control of two motors in highly flexible configurations. Based on the Arm® Cortex™-M3 processor, the LPC1500 microcontroller series has two 12-bit, 12-channel, 2 Msps ADCs and an on-chip quadrature encoder interface (QEI) to enable highly accurate control of both sensored and sensorless motor combinations. Four on-chip comparators enable fast-response over-current/voltage monitoring and protection; and four flexible SCTimer/PWM timers provide up to 28 PWM channels in a tightly coupled analog and timing subsystem, with minimal load on the CPU. Ideal for use with a wide range of brushless DC (BLDC) motors, permanent-magnet synchronous motors (PMSM), and AC induction motors (ACIM) commonly found in products such as large home appliances, HVAC, industrial pumps and generators, and more. They are also well suited for industrial applications requiring high-precision data sampling and real-time control, such as digital power and instrumentation. The LPC1500 series of microcontrollers are fully supported by the LPC software ecosystem and an extensive collection of tools, drivers and middleware.
With ultra-efficient motor control firmware, easy-to-use GUI-based tuning tools, and two new motor control solution kits, NXP LPC1500 microcontrollers simplify evaluation and development of motor control applications, without requiring deep motor control experience.
部件编号包含: LPC1519JBD100.
快速参考 文档类别.
1-5 / 13 文件
安全文件正在加载,请稍等
4 设计文件
安全文件正在加载,请稍等
1-5 / 8 硬件
其他可用硬件. 查看我们的精选合作伙伴解决方案.
1-5 / 23 硬件
查找支持此产品的所有合作伙伴,请参阅 合作伙伴市场.
1-5 / 40 软件产品
安全文件正在加载,请稍等
1-5 / 40 软件产品
查找支持此产品的所有合作伙伴,请参阅 合作伙伴市场.
1-5 / 6 工程服务
There are no results for this selection.
查找支持此产品的所有合作伙伴,请参阅 合作伙伴市场.