Entry-level 32-bit Microcontroller (MCU) based on Arm® Cortex®-M3 Core

LPC1317FBD48

The LPC1317FBD48 is an Arm Cortex-M3 based microcontroller for embedded applications featuring a high level of integration and low power consumption. The Arm Cortex-M3 is a next generation core that offers system enhancements such as enhanced debug features and a higher level of support block integration. The LPC1317FBD48 operates at CPU frequencies of up to 72 MHz. The Arm Cortex-M3 CPU incorporates a 3-stage pipeline and uses a Harvard architecture with separate local instruction and data buses as well as a third bus for peripherals. The Arm Cortex-M3 CPU also includes an internal prefetch unit that supports speculative branching.

查看产品图片

产品详情

选择区域:

Features

  • Arm Cortex-M3 r2p1 processor, running at frequencies of up to 72 MHz
  • Arm Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC).
  • Non Maskable Interrupt (NMI) input selectable from several input sources
  • System tick timer
  • 64 kB on-chip flash program memory with a 256 byte page erase function
  • In-System Programming (ISP) and In-Application Programming (IAP)
  • 4 kB on-chip EEPROM data memory with on-chip API support
  • 10 kB SRAM data memory
  • 16 kB boot ROM with API support
  • Standard JTAG test interface for BSDL
  • Serial Wire Debug
  • Support for ETM Arm Cortex-M3 debug time stamping
  • 40 General Purpose I/O (GPIO) pins
  • 8 GPIO pins can be selected as edge and level sensitive interrupt sources
  • Two GPIO grouped interrupt modules
  • High-current source output driver (20 mA) on one pin (P0_7)
  • High-current sink driver (20 mA) on true open-drain pins (P0_4 and P0_5)
  • Four general purpose counter/timers
  • Programmable Windowed WatchDog Timer (WWDT)
  • Repetitive Interrupt Timer (RI Timer)
  • 12-bit ADC with eight input channels and sampling rates of up to 500 kSamples/s
  • USART with fractional baud rate generation
  • Two SSP controllers with FIFO and multi-protocol capabilities
  • I2C-bus interface supporting the full I2C-bus specification and Fast-mode Plus
  • Crystal Oscillator with an operating range of 1 MHz to 25 MHz
  • 12 MHz high-frequency Internal RC oscillator (IRC) trimmed to 1 % accuracy
  • Internal low-power, low-frequency WatchDog Oscillator (WDO)
  • PLL allows CPU operation up to the maximum CPU rate
  • Clock output function with divider
  • Four reduced power modes
  • Power profiles residing in boot ROM
  • Processor wake-up
  • Integrated PMU (Power Management Unit)
  • Power-On Reset (POR)
  • Brownout detect with four separate thresholds for interrupt and forced reset
  • Individual device serial number for identification
  • Single 3.3 V power supply (2.0 V to 3.6 V)

Target Applications

  • Consumer peripherals
  • Medical
  • Industrial control
  • Handheld scanners
  • USB audio devices

文档

快速参考 文档类别.

筛选

1-5 / 12 文件

展开

设计资源

选择区域:

设计文件

筛选

4 设计文件

  • 模型

    IBIS models for LPC13xx pkg LQFP-48

    ZIP版本 1Jun 13, 2017 16:19:0084.2 KBIBIS_LPC13xx_LQFP-48
    下载
  • 模型

    IBIS models for LPC13xx

    ZIP版本 1Jun 13, 2017 16:19:0084.2 KBIBIS_LPC13xx
    下载
  • 符号和尺寸

    LPC13xx ORCAD symbols

    ZIP版本 0Jun 3, 2016 00:00:002.9 KBLPC13XX-ORCAD-SYM
    请登录
    下载
  • 符号和尺寸

    LPC13xx Eagle symbols

    ZIP版本 0Jun 3, 2016 00:00:005.3 KBLPC13XX-EAGLE-SYM
    请登录
    下载

硬件

筛选

3 硬件

软件

筛选

1-5 / 30 软件产品

展开

工程服务

1-5 / 7 工程服务

展开

查找支持此产品的所有合作伙伴，请参阅 合作伙伴市场.

培训

筛选

2 培训