Flash-Based Low-Power DisplayPort to VGA Adapter

PTN3356

PTN3356 is a flash-based DisplayPort to VGA adapter optimized primarily for motherboard applications, to convert a DisplayPort signal from the chip set to an analog video signal that directly connects to the VGA connector. PTN3356 integrates a DisplayPort receiver, a high-speed triple video digital-to-analog converter that supports a wide range of display resolutions, for example, VGA to WUXGA.

PTN3356 supports two DisplayPort lanes operating at either 2.7 Gbit/s or 1.62 Gbit/s per lane.

PTN3356 supports I²C-bus over AUX per DisplayPort standard, and bridges the VESA DDC channel to the DisplayPort Interface.

PTN3356 is powered from a 3.3 V power supply and consumes approximately 200 mW of power for video streaming in WUXGA resolution and 410 μW of power in Low-power mode. The VGA output is powered down when there is no valid DisplayPort source data being transmitted. PTN3356 also aids in monitor detection by performing load sensing on RGB lines and reporting sink connection status to the source.

查看产品图片

产品详情

Features

Key Features

  • VESA-compliant DisplayPort V1.4 converter

部件编号包含： PTN3356BS, PTN3356R1BS.

文档

快速参考 文档类别.

筛选

1-5 / 6 文件

展开

设计资源

硬件

筛选

1 硬件产品

工程服务

2 工程服务

查找支持此产品的所有合作伙伴，请参阅 合作伙伴市场.

支持

您需要什么帮助?

搜索