ARCHIVED
- Evaluation Board
- Simple Monitor/Programmer in Flash EEPRO
- Single Chip or Expanded
- Bus Operation All I/O and Bus to Header Connectors
- 4MHz Reference Crystal Oscillator
- Operating power: 50ma @ 3.3V (20MHz)
- 6 to 20VDC input voltage
- Prototyping area with IC placement locations
- MPC555PB Microcontroller
- Power PC core with Floating Point Unit Processor
- 40MHz Operation, software selectable
- 448K Bytes Flash EEPROM on chip
- 26K Bytes SRAM
- External Interface I/O system with 56 I/O lines or External Bus of 24 address lines, 32 data lines and 4 programmable chip selects
- Queued Serial Multi-Channel Module with 2 SCI UART channels w/16 Byte FIFOs, Queued Serial Peripheral Interface
- 2 TPU3 Time Processor Units with 16 Channels with I/O per Unit; 9 Pre-programmed functions 2 Queued 10 Bit Analog to Digital Converters w/up to 16 input channels each, 10us conversion time, 64 result registers, selectable modes and data type
- 2 Controller Area Network (CAN2.0B) Modules w/TouCAN protocol 2.0 A and B, 16 message buffers with masking, Time-stamping and Bus Wake-up
- 18 Channel Modular I/O System (MIOS1) w/8 PWM Output Channels, Two 16 Bit Counter Modules, 2 General Purpose 8 Bit I/O Ports and 10 Double Action Submodules
- Background Debug Module and JTAG
- DC to 40MHz Operation
Archived content is no longer updated and is made available for historical reference only.