Quad Valve Controller System on Chip

MC34SB0410

滚动图片以放大

产品详情

框图

MC34SB0410 Quad Valve and Pump Controller Block Diagram

MC34SB0410 Quad Valve and Pump Controller System on Chip block diagram

Features

Supply Voltage

  • Up to 36 V

Low Side Drivers (x4)

  • Four low side drivers regulated up to 2.25 A
  • +/-2.0% precision reachable with calibration
  • Four low side drivers PWM up to 5 kHz with a maximum current capability up to 5 A
  • All low side drivers are integrated to save PCB space

High Side Pre-Driver

  • Allows to control a motor up to 16 kHz

10-Bit ADC

  • ADC can monitor external or internal signals to enhance the control unit safety level

Embedded Supervision

  • Under-voltage, over-voltage, clock fail detection
  • Open load, short circuit, over temperature detection on each low side
  • Vds monitoring of each low side driver in real time
  • Over current and over temperature detection on the high side pre-driver

Serial Peripheral Interface (SPI)

  • Only one SPI is needed to control the device
  • MCU sent only once the current or the duty-cycle targeted through the SPI
  • MCU does not need to generate PWM signals at high frequency

重要参数

  • Load Current (IL) [TYP] (A)
    2.25, 5.3
  • Load Supply Voltage (Min) (V)
    6
  • Load Supply Voltage (Max) (V)
    36
  • Interface and Input Control
    SPI / SPI

文档

快速参考 文档类别.

3 文件

设计资源

选择区域:

硬件

3 硬件

软件

2 软件文件

请注意: 推荐在电脑端下载软件,体验更佳。

工程服务

2 工程服务

查找支持此产品的所有合作伙伴,请参阅 合作伙伴市场.

支持