Our CodeWarrior® for MCU's v11 integrates the development tools for the ColdFire®. ColdFire+, DSC, Kinetis®. Qorivva, RS08, S08 and S12Z architectures into a single product based on the Eclipse open development platform. Eclipse offers an excellent framework for building software development environments and is a standard framework used by many embedded software vendors.
Software offered 'As is', support provided on NXP® Communities only – GPIO pins implement JTAG interface communication. Example code reads JTAG ID from a target device connected over JTAG signals TCK, TMS, TDI and TDO
Library of instruction tests for the Power Architecture e200Zx family of MCU cores. Includes instruction tests for VLE, BookE, and SPE instruction sets . Includes report of the percentage of instructions that are covered by the tests (instruction coverage). Libary is not device specific and can be used with any MPC56xx using a Power Architecture e200Zx core.
Autosar (Classic) v3.0 rev 3 compliant operating system. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior. Autosar configuration tool EB tresos Studio included, solely for use with drivers of this package. Conditions of use for this software and other general information at www.autosar.org and at Autosar.
AUTOSAR (Classic) v3.0 rev 3 microcontroller abstraction layer drivers for ADC, CAN, DIO, FLS, FR, GPT, ICU, LIN, MCU, PORT, PWM, SPI, WDG, plus additionally FEE. Tested with Green Hills MULTI, Wind River DIAB, CodeWarrior, HighTec. AUTOSAR configuration tool EB tresos Studio included, solely for use with drivers of this package. Conditions of use for this software and other general information at www.autosar.org and at AUTOSAR .
The Tuning Wizard is a HMTL based user-friendly graphical plug-in tool for Our FreeMASTER. This tool is intended for the development of PMSM FOC applications, real time control structure parameter tuning and will aid motor control users in adapting NXP® MC solutions to their motors without a detailed knowledge of PI controller constant calculations.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Hardware Emulation and Trace system for embedded development with NXP’s Power Architecture® devices featuring (i) Non-intrusive debugging, (ii) Full Instruction Trace and Data Trace, and (iii) Performance Analysis and Code Coverage Analysis
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
The iC5000 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and Nexus/ETM trace.
The iC3000 Active Emulator is a powerful and adaptable debug and test tool. The new "swap the card" technology preserves the investment in the iC3000 unit while providing adaptability to a wide range of target microcontrollers and debug technologies
The iC5700 is a single hardware platform supporting many different processors and microcontrollers. From the debug technology perspective, it supports on-chip debug emulation including on-chip trace buffers and external (high speed) trace ports.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
Compatibility Mode - Full support for existing legacy code, compile your existing code base nearly "As Is." C Compiler Toolkit for all eTPU and eTPU2 targets in Our MPC55xx, MPC56xx Power Architecture micros, MCF52xx Coldifre micros
Develop with industry proven tools for C/C++ embedded applications, including compilers and run-time libraries, source- and assembly-level debugger, integrated development environment (IDE). Supports bare metal, Linux, Nucleus, other OS's.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
Free command-line edition of the popular Sourcery CodeBench development tools. Available for NXP ARM and Power Architectures for bare metal bring-up, code debug in cache, ROM, RAM, Flash. Available now for free download.
winIDEA is an integrated development environment (IDE) that compliments all iSYSTEM hardware. - Editor, project and build manager, high level debugger - Tools to analyze program and data flow, performance measurement tools
testIDEA offers Real-Time Unit Testing by execution of test cases and test vectors on the real customer hardware without code instrumentation. testIDEA uses the isystem.connect programming interface which is a free and open API set within winIDEA.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
Universal debug module with USB 3.0 interface to host computer (Windows and Linux). Supports all processor architectures. Interfacing to target is done with TRACE32 debug cable (must be ordered separately).
TRACE32 NEXUS AutoFocus (parallel) adapter for Qorivva MPC5xxx. Supports up to 16 MDOs, MSEO1/2, SDR and DDR modes. Provides signals for EVT, external watchdog disable and handshake for calibration tool operation. All pins 0.9V..5.5V compatible.
TRACE32-ICD for MPC5xxx is a high performance JTAG debugger. USB or ETH interface for connection to PC or workstations. Supports VLE, SPE, LSP, FLASH programming, MMU, CACHE debugging and many RTOS. eTPU, SPT and GTM debugger included.
EB tresos TimE Protection is a sofware module that enables the timing and ececution supervision of safety related applications. This, it provides freedom from interference of safety related software modules in regards to time and execution.
EB tresos Safety E2E Protection is a set of modules that supports the transmission of safety-related data between ECUs. It consists of an end-to-end communication protection library and an end-to-end protection wrapper.
EB tresos AutoCore OS is a single- and multi-core operating system which supports all AUTOSAR scalability classes including memory protection. The multi-core version includes AUTOSAR extenstions like Inter-OS-Application Communicator (IOC).
Deos is a time & space partitioned RTOS, certified to DO-178B, Level A since 1998. Deos offers several unique fundamental and patented architectural advantages and delivers a high performance, low risk, simple to certify solution.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
EB tresos AutoCore is based on AUTOSAR release 4.0 including support for AUTOSAR 3.2 and previous releases. The hardware independent and hardware dependent modules can be integrated and qualified on various freescale automotive microcontrollers.
uC/TCP-IP is a robust embedded protocol stack written in accordance with the relevant RFCs. The stack is packaged with implementations of a number of popular application protocols and offers IPv4 and IPv6 support
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.