The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
A universal and compact solution for reprogramming ECUs quickly, efficiently and securely. Support for CAN, LIN, FlexRay and Ethernet programming including OEM and non-OEM ISO14229/30 (UDS/KWP) based download flows.
The SIP gives you a decisive advantage in developing your ECU software: Before delivery, we test and integrate your package on suitable HW, so that you can get the entire package up and running in just a few days.
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes a GUI Builder and Simulation Environment to help speed your development.
Highly config middleware libs/pkgs for gfx interfaces such as Qt or Embedded Wizard, mass storage, WiFi & networking comm, USB & other serial devices for today’s Medical, IoT & Industr’l apps; process model allows task/lib isolation & mem protection.
MICROSAR OS is a preemptive real-time multitasking operating system optimized for single and multi-core microcontrollers. It conforms to AUTOSAR 3.x and 4.x in scalability class 1-4. ISO26262 support available.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
Nucleus has been deployed in over 3 billion devices since 1993 making the code base extremely stable. Nucleus is the only RTOS that offers a Power Management Framework to compliment hardware power modes to conserve power usage in the device.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
The uVPN SDK implements IKEv1/IKEv2/IPsec for a cryptographically secure solution for IP packet networking. It provides authentication, data encryption and message integrity for embedded devices. VPN SDK is a standards-based, full-featured toolkit.
Software update installer and boot loader solution for embedded platforms. This product family manages multiple images to install, activate, and rollback to last-know-good-version, encrypts images, controls software distributions and product options.
emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.
EUSB Device is an embedded USB device stack. It provides Class Drivers for HID, Comms Device and Mass Storage. EUSB Device supports on-chip device controllers for a variety of processors and controllers.
embOS/IP is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
Add SSH and secure TCP/IP tunnel with uSSH embedded SDK. This product includes an embedded server and client, flexible interactive shell. SCP and SFTP interface to FileZilla, WinSCP, Putty. File system integration.
EUSB Host is an embedded USB host stack. It supports the on-chip host controllers a variety of processors and controllers. EUSB Host supports Class Drivers for Hub, HID, Comms Device, Mass Storage and Printer.
The phyCORE-Vybrid supports VF5xx and VF6xx controller solutions offering a sophisticated human-machine interface, multiple connectivity options, integrated power management, powerful peripherals, and concurrent real-time control.
Micron manufactures a wide range of NOR Flash products, including Serial and quad SPI, Industry standard Parallel NOR flash and high performance parallel NOR Flash supporting over 250 MB/s of bandwidth.
We build our modules from start to finish—designing, manufacturing, and testing all of the DRAM ourselves before assembling the modules and testing again. So, from high-performance SODIMMs to high-density LRDIMMs, you can depend on Micron.