NXP offers BSDL and IBIS models for MCUs. Symbols and footprints in a single, vendor neutral BXL file are also provided. A free export tool provided by Accelerated Designs can be used to convert BXL files to the CAD system of your choice.
NXP offers BSDL models for MCUs. Symbols and footprints in a single, vendor neutral BXL file are also provided. A free export tool provided by Accelerated Designs can be used to convert BXL files to the CAD system of your choice.
Zephyr OS is a small, scalable open source RTOS for IoT Embedded Devices, optimized for resource constrained devices, and build with security in mind. NXP is a platinum, founder member of the Zephyr OS project.
Processor Expert Software for i.MX Processors is a suite of configuration tools for the i.MX family of processors. It contains the Pin Settings Tool which provides an easy way to configure pin signals, from multiplexing (muxing) to the electrical properties of pins. With the Pin Settings Tool all the pins can be configured with a graphical user interface, and then generate normal C code which then can be used in the application.
Supports many NXP processor families and offers on-board storage of programming images, provides power to the target, supports manual or automated programming, and has an easy-to-use touchscreen interface.
u-blox evaluation kit for host based JODY-W263 Wi-Fi/Bluetooth modules - Wi-Fi Standards IEEE 802.11a/b/g/n/ac and Bluetooth/Bluetooth Low Energy 5.1 . The kit includes SDIO/micro-SDIO adaptor, USB-to-UART cable for Bluetooth, on-board SDIO level-shifter, dual-band antennas - to connected over SMA connectors.
The 3-Phase Permanent Magnet Synchronous (PMSM) Motor Control Reference Design is based on Kinetis V Series MCUs and intended to provide the example for 3-phase sensorless PMSM motor control solutions. The Reference design utilizes closed-loop field oriented vector speed (FOC) control mechanism.
MicroEJ VEE (Virtual Execution Environment) is a standard, safe, secure on-device platform, capable of running on any NXP's MCU, MPU and SoC. MicroEJ VEE is available as a Virtual Device, and as an embedded secure container.
Create engaging user experiences for microcontrollers other resource-constrained devices using QML, and a rich set of ready-made Controls rendered by a new graphics rendering engine with a low memory footprint.
emUSB Device is a high speed USB device stack. This is written in ANSI C and can run on any platform. emUSB can be used with embOS or any RTOS chosen. A variety of target drivers are available. Support for new platforms can usually be added no cost.
emMQTT is provides the client functionality of the Message Queue Telemetry Transport protocol to a stack. emMQTT uses sockets and can be used with any IP stack such as emNet using the socket interface.
emModbus, SEGGER's implementation of the Modbus protocol, supports communication via UART (ASCII, RTU), Ethernet (Modbus/TCP and Modbus/UDP), and is capable to communicate with any Modbus compliant device.
MDK Middleware provides royalty-free, tightly-coupled software components that are specifically designed for communication peripherals in microcontrollers. It is provided as part of the MDK-Professional or MDK-Plus editions in binary format.
emSSL is a SEGGER software library that enables secure connections across the Internet. The small resource requirements such as 7kB RAM and 20kB ROM usage make emSSL the ideal product for single-chip-systems seeking security.
SFFS is a failsafe flash file system for NOR and NAND devices. It provides complete reliability and protection against unexpected power failures or resets. SFFS provides wear leveling and ECC algorithms to ensure optimal use of flash.
emSecure is a SEGGER software package that allows creation and verification of digital signatures. emSecure can be used in numerous applications to prevent cloning and tampering with the device it runs on. It is optimized for embedded systems
EUSB Device is an embedded USB device stack. It provides Class Drivers for HID, Comms Device and Mass Storage. EUSB Device supports on-chip device controllers for a variety of processors and controllers.
MQX RTCS is a feature rich TCP/IP protocol stack that includes many application layer protocols. It is scalable enabling speed and footprint optimization. It includes Stack Aware Debugging plug in for CodeWarrior, IAR, and Keil Tools
emWin the most efficient and comprehensive GUIs available. It is written in ANSI C and supports any display controller, display and CPU. emWin includes the AppWizard GUI design tool and a Simulation Environment to help speed your development.
emNet is an ANSI-C TCP/IP Stack written specifically for embedded applications while extending the standard socket interface. This is complemented by a speed optimized true Zero-Copy API which reads and writes data without the use of a memcopy.
Green Hills offers scalable suite of integrated communication stacks, middleware and graphics solutions, including secure networking stacks and protocols, SNMP, web applications, wireless, CORBA, USB, CAN and advanced file systems.
emUSB Host, SEGGER’s USB host software stack, implements full USB host functionality, including external hub support, and optionally provides device class drivers. It enables developers to easily add USB host functionality to an embedded system.
emFile is an embedded file system which can be used with any type of storage device. A Microsoft Windows compatible FAT12/16/32 format, and a proprietary SEGGER EFS format are available. Support for NAND, NOR, SD, SDHC, MMC, eMMC, IDE, CompactFlash.
EUSB Host is an embedded USB host stack. It supports the on-chip host controllers a variety of processors and controllers. EUSB Host supports Class Drivers for Hub, HID, Comms Device, Mass Storage and Printer.
The IoT Toolkit is a collection of libraries that enables communication with modern IoT based environments and devices. It's a high-performance collection of libraries optimized for minimum memory consumption in RAM, ROM, high speed, and versatility.
Alango’s Voice Activity Detection (VAD) technology reliably detects human speech in an acoustic signal. The technology is based on a proprietary, high-resolution spectral noise estimation algorithm operating in real time.
Most toolchains using GCC also use either newlib, newlib-nano or glibc. Unfortunately, these libraries have significant disadvantages over professional runtime libraries for embedded systems. This is where the SEGGER Runtime Library comes in.
Developed in partnership with the world’s leading chip companies over a 15-year period, and now downloaded every 175 seconds, FreeRTOS is a market-leading real-time operating system (RTOS) for microcontrollers and small microprocessors.
embOS is an ANSI-C RTOS which has been used within products throughout the embedded industry for more than twenty years. During this time the SEGGER team has improved and optimized embOS to continuously meet the demands of modern NXP hardware.
emCompress offers solutions to compress data for all kinds of applications where size matters. Designed for embedded systems, emCompress can compress and decompress data even on smallest microcontrollers.
A common challenge for manufacturers of embedded systems is to guarantee a system's firmware can be updated easily. To fix bugs in the field or to enhance the features of deployed systems, SEGGER provides emLoad, the bootloader for firmware updates.
MULTI is a complete Integrated Development Environment (IDE) for embedded applications for C/C++, Embedded C++ and includes an advanced debugger, profiler, run-time memory checking, project builder, editor, instruction set simulator, and more.
Arm Development Studio is the most comprehensive embedded C/C++ dedicated software development toolchain for the architecture. It accelerates software engineering whilst helping you build robust and more efficient products.
Embedded Studio is a streamlined and powerful C/C++ IDE for ARM microcontrollers specifically designed to provide you with everything needed for professional embedded development: an all-in-one solution aiming at stability and a continuous workflow.
MICROEJ SDK includes a wide range of powerful tools and libraries, built on Eclipse, to create your own custom device software platform or Java/C applications. It includes powerful compilers, debuggers and an advanced code editor.
IAR Embedded Workbench for Arm is an integrated development environment with project management tools and editor. It includes a highly optimizing C/C++ compiler and the comprehensive C-SPY Debugger with simulator and hardware debugging support.
Mbed offers an open source embedded operating system, free software libraries, online tools, cloud services and developer ecosystem to enable the creation and deployment at scale of IoT solutions based on Arm microcontrollers.
SystemView is a real-time recording and visualization tool for embedded systems that reveals the true runtime behavior of an application, going far deeper than the system insights provided by debuggers.
Ozone is more than a simple debugger. Its various features, including trace, code profiling and code coverage analysis make it a powerful performance analyzer, which enable you to get full system insight, and to track down inefficiencies and bugs.
UDE is a debug, trace and test platform for a wide range of embedded systems. It supports the debugging of multicore targets within one consistent user interface. Run-time analysis and outstanding scripting capabilities are more key features.
Free of charge instruction set simulator with the same powerful user interface and features of the TRACE32 debug and trace tools. With API for peripheral simulation. A license is required if used in automated test environments.
The emWin AppWizard gives developers and designers a drag-and-drop tool to quickly implement the user interface framework. This coupled with the emWin Simulation Environment offers a professional solution to jump start any embedded application.
Binary SD card demo image that contains NXP's Yocto Linux and Crank Software's graphical GUI demo launcher. Great for users who want to evaluate and understand the graphical capabilities of the NXP platform in question.
Storyboard provides a faster way to create best-in-class GUIs across the widest range of target devices and was built with scalability and resource management at the forefront, ensuring that teams can build modern GUIs on budget, and on time.
Embedded Wizard is a solution that enables the creation of sophisticated GUIs for MCUs and MPUs. The GUI development is speeded-up with the use of the built-in WYSIWYG editing facility, instant prototyping, simulating and debugging on PC.
JTAG/SWD debug probe with USB interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
The ULINKpro debug and trace unit connects your PC's USB port to your target system and allows you to program, debug, and analyze your applications using its unique streaming trace technology. ULINKpro is compatible with Keil MDK and Arm DS.
I-jet is a high-performing in-circuit debugging probe for ARM. It is capable of delivering power to the target board and measuring target power consumption. I-jet is fully plug-and-play and completely integrated with IAR Embedded Workbench for ARM.
J-Trace PRO for Cortex-M is setting a new standard for trace probes. It enables continuous streaming trace, lifting the limitations by internal buffers and slow data transmission to give you all the insights you need to develop & optimize your code.
Builds atop the J-Link to further enhance the debug experience. The J-Link ULTRA+ is three times faster than the industry standard J-Link, at a 3 MBytes/s download speed to RAM. It comes complete with J-Flash, and Unlimited Flash Breakpoints.
Production programmer. Models support high-speed, low-cost, in-circuit flash programming, debugging, & test of many NXP 8-/16-/32-bit systems. Stand-alone or host-controlled operation. USB, serial, Ethernet. Programs internal and external flash.
J-Trace PRO Cortex provides support for Cortex-A/R/M based microcontrollers. The SuperSpeed USB 3.0 interface of J-Trace PRO Cortex enables continuous streaming trace via USB with the full trace clock, lifting the limitations by internal buffers.
Supercharge your IDE with the worlds fastest debug probe. The J-Link Flash download technology achieves a performance very close to the maximum speed possible. No other probe comes close. These speeds are achieved when working under any popular IDE.
The UAD3+, equipped with up to 4 GB of trace memory and powerful interfaces to target and host, is the right solution for trace, multicore debugging, profiling and code coverage analysis. Parallel and high-speed serial trace (AURORA) is supported.
Lauterbach has over 40 years of experience in making world class microprocessor development tools. TRACE32 NEXUS for is a high-end debug and trace system for MPC5XXX with Aurora NEXUS trace port. eTPU, SPT and GTM debuggers are included.
Interactive flash programming software for ARM Cortex-M devices, including NXP's Kinetis, LPC, i.MX RT, and S32 devices. Comes with command-line version for scripted programming. Communicates using compatible PEmicro hardware interfaces.
The handheld stand-alone Flash Programmer for on-chip and external flash memory. Flasher Portable PLUS is a battery driven programming tool for microcontrollers with on-chip and/or external flash memory.
The J-Link EDU emulator is our standard J-Link emulator wrapped in a new educational marked housing. It is intended for educational use and the home hobbyist. Support for our Unlimited Flash Breakpoints and GDB Server enhancement modules included.
Advanced Cyclone programmer. Models support high-speed in-circuit flash programming, debugging, and test of many NXP 8-/16-/32-bit MCUs. Enhanced speed/security/storage. Stand-alone or host-controlled operation. Programs internal & external flash.
Lauterbach has experience in making world class microprocessor development tools since 1979. TRACE32 supports technologies like JTAG, SWD, NEXUS or ETM with embedded debuggers and real-time trace solutions for all NXP processor series.
J-Link PRO is an enhanced version of the SEGGER J-Link. This emulator supports ARM/Cortex devices. This has an Ethernet interface in addition to the USB interface. This includes a Flash programming utility, and boast a 3 MB/s download speed to RAM.
The (UAD2next) combines the state-of-the-art debugging features and CAN with trace capabilities. It can be extended by plugin trace modules supporting e.g. ARM CoreSight parallel trace and AURORA serial trace and is equipped with 512MB trace memory.
Flasher Secure is a mass production programming system, capable of protecting the vendor’s IP regardless of the production site. It provides full control over the programming process at contract manufacturers (CM) and similar environments.
µTrace is Lauterbach‘s all-in-one debug and trace solution for Cortex-M processors. Recommended for single and multi-core proccessors with 4 channel trace ports. Optional analogue probe for voltage, power and energy measurements available.
The UAD2pro offers fast and flexible communication between Universal Debug Engine on the Host PC and the microcontroller target. Host interface is USB 2.0. Target interfaces also optionally isolated are JTAG, cJTAG, OnCE, SWD, CAN, ASCx and more.
In-Circuit-Flash-Programmer based on the J-Link family for production and in-field-service. Offers fastest flash algorithms available, multiple integration options (RS232, Ethernet, USB, two-wire) and stand alone mode.
JTAG/SWD debug probe with WiFi interface. Based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousand places for development and production purposes.
uSD-M.2 adapter board provides out-of-box experience for NXP i.MX with Murata’s M.2 Module Family enabled by Embedded Artists; interfacing WLAN/BT-signals including WLAN-SDIO, BT-UART, BT-PCM/I2S, and GPIO's are included on M.2 connector pins.
Type 1DX is high performance module based on Infineon CYW4343W combo chipset which supports Wi-Fi 802.11b/g/n + Bluetooth 5.1 BR/EDR/LE up to PHY data rate of 65Mbps on Wi-Fi and 3Mbps on Bluetooth. The module dimensions are 6.95 x 5.15 x 1.1mm.
Type 1MW is a 2.4GHz & 5GHz module based on Infineon CYW43455 combo chipset which supports Wi-Fi 802.11a/b/g/n/ac + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 433Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 7.9 x 7.3 x 1.1mm.
Type LV is a 2.4GHz & 5GHz module based on Infineon CYW43012 combo chipset which supports Wi-Fi 802.11a/b/g/n + Bluetooth 5.0 BR/EDR/LE up to PHY data rate of 72.2Mbps on Wi-Fi and 3Mbps on Bluetooth. Module dimensions are 10.0 x 7.2 x 1.4mm.
The VisionSOM-RT family is a SODIMM200-sized SoM based on the NXP i.MX RT procesor. Module is featuring high computation performance, real-time functionality and MCU usability and QSPI or eMMC Flash memory.
OK1052-C is a single board computer/ development board designed based on NXP Cortex -M7 crossover processor i.MX RT1052 belongs to i.MX RT1050 series MCU. It operates at speeds up to 528MHz to provide high CPU performance and best real-time response.
Small form factor (68x30mm) OEM/SOM board with 4 MByte OctalSPI (EcoXiP from AdestoTech) for high performance eXecute-In-Place. 32 MByte SDRAM. 10/100 Mbps Ethernet-PHY. Optional Wi-Fi module, NINA-W132 from uBlox supporting IEEE 802.11b/g/n.