AN4117: The MPC5125 tower module (TWR-MPC5125) can operate stand-alone or within the Tower® System. This application note describes how to use the MPC5125 Tower System Kit (TWR-MPC5125-KIT) that includes the TWR-MPC5125, TWR-SER peripheral module, and TWR-ELEV connectors. The MPC5125 Tower System Kit provides access to additional features of the MPC5125 including a second Ethernet port, RS232/RS485 connector, and a second CAN port.
In this Quick Start Guide, you will learn how to set up the TWR-MPC5125 module and run the default demonstration software. The TWR-MPC5125 module is a single board computer as well as a part of the Tower® System, a modular development platform that enables rapid prototyping and tool re-use through reconfigurable hardware.
This document explains the out-of-box demo of NXP
TWR-MPC5125 system. TWR-MPC5125 system is an NXP
tower compatible system and based on Power Architecture
microprocessor MPC5125. This document presumes that the
reader has already gone through the Quick Start Guide and
followed the steps to setup the hardware system ready. If not,
please refer to the Quick Start Guide firstly.
The MPC5125 Tower® System is based on Our MPC5125
microprocessor. The board provides on-board DDR2 SDRAM, NAND
FLASH,CAN ports, USB 2.0, 10/100 Ethernet, HDMI,USB Debug Port.All
powered from a 5 Volt wall mount power supply.