A female header connector with all of the MCU signals
“I/O”部分包括:
A Reset push button
Four additional push button
1个电位计
8位DIP开关
1个压电式蜂鸣器
1个光感器
1个温度传感器
10个用户LED
1个用于驱动和外部LCD的电路
一系列跳线,用于连接/断开上述发往/来自微控制器的控制
数据连接
“RS-232”部分包含两个RS-232接头,配备一个跳线,用于支持RS-232通信
“串行设置“部分包含跳线,用于选择通信选项
A power supply section containing
A 12 VDC barrel input connector (2.1 mm)
4路微接线端子,用于向微控制器提供专用电源和电压参考
1根跳线,用于选择电源(USB总线或圆柱形接头)
电源开关
microDART INTERFACE
Section (with the main circuitry mounted on the back of the board) which allows the host PC to communicate with the microcontroller through a standard USB interface. 提供用于配置该模块的跳线。借助microDART在线调试固件,BDM命令能够通过USB总线发送给目标微控制器。此外,还通过同一个USB连接自动提供一个虚拟COM端口。This virtual COM port can be used by standard terminal programs, like HyperTerminal, to send/receive serial characters to/from the target microcontroller