Peripheral Signals view

The Peripheral Signals view shows a list of peripherals and their signals. Only the Peripheral Signals and Pins view show the checkbox (allocated) with status.

Table 1. Status codes
Color code Status
Error
Configured
Not configured
Warning
Dedicated: Device is routed by default and has no impact on the generated code.
Figure 1. Peripheral Signals view

Use the checkbox to route/unroute the pins.

To highlight the pin/routing configuration about the peripheral in the Package and Routing Details views, right-click the signal and select Highlight.

To route/unroute multiple pins, click the peripheral and select the options in the Select signals dialog.

Figure 2. Select signals dialog