The generated code contains information about the Clocks Tool settings that are used in the tool (block within a comment in YAML format).
The following is an example of the settings information in the generated source
code.
Figure 1. Setting Information in the source code
If this information is not corrupted, it's possible to re-import the clock settings
into the tool using the following steps.
- Select File > Import….
- Select Clocks Tool / Import Source Files.
- Click Next.
- Click Browse.
- Navigate and select the clock_config.c file previously produced by the Clocks Tool.
- If the settings parse successfully, clock configurations are added into the current global configuration.