Boot Configuration Panel

Allows configuration of boot specific options and contains Import/Export buttons for binary IVT image.

Figure 1. Boot Configuration

Figure 2. Interface selection

The Interface selection panel lets the user choose between available boot device types.

For QuadSPI Serial Flash and the Configure QuadSPI parameters checked, the memory will have a reserved segment in the [ 0x200 – 0x3FF ] area. And for SD boot device, the segments must be aligned at 512 bytes.

Under the Interface selection panel are the Import/Export IVT Image buttons and the Export Blob image button. For more information about exporting please visit IVT Export (IVT Export)

Also, the start address of the IVT image is displayed in this panel.

Figure 3. IVT Start Address

By default, 'IVT Image Start Address' is a read-only variable and its value is 0x0. It can be customized to be writable but the client should not tweak the encrypted data by himself to make it so.