Working with Flash Programmer

The CodeWarrior Flash Programmer can program the flash memory of the target board with code from any CodeWarrior IDE project or any individual files. The Flash Programmer (FP) feature is a target task that lets you run a series of actions on a flash: internal or present on a board (NOR, NAND, etc.). The supported operations are:

• Program/Verify, refer Add Program / Verify Actions.
• Erase/Blank Check, refer Add Erase/Blank Check Actions.
• Checksum, refer Add Checksum Actions.
• Diagnostics, refer Add Diagnostics Actions.
• Dump Flash, refer Add Dump Flash Actions.
• Protect/Unprotect, refer Add Protect/Unprotect Actions.
• Secure/Unsecure, refer Add Secure/Unsecure Actions

The CodeWarrior Flash Programmer lets you program the flash memory of any of the supported target boards, from within the IDE. You can do this using either the pre-defined tasks provided with the CodeWarrior installation, or create your own specialized tasks. Each of these options is described in the following topics:

• Use Pre-Defined Programming Task
  
• Importing Pre-defined Task
  
• Creating Flash Programmer Target Task
  
• Configure the Flash Programmer Target Task
  
• Run Flash Programmer Target Task
  
• Create Flash Programmer Task
  
• Flash Programmer for MCF5441X