Use Case 2: Execute target-based Memory Tests on target

You need to perform the following action to execute the target based memory test on the target:

1. Select Memory Test in the Action Type.
2. Specify Target Address and Access Size settings from the Memory Access section.
3. Specify the following settings for Memory Tests section:
   • Test Area Size: The tested memory region is computed from Target Address until Target Address + Test Area Size.
   • Tests to Run: Select tests to run on the target.
   • Number of passes: Specify number of times a test will be executed.
   • Use Target CPU: set the Address to which the test driver (algorithm) is to be downloaded.
4. Save the settings.
5. Press Execute to execute the action.