=========================
FSICE Emulator Connection 
=========================

=====================
fsicebase.tgt v6.1.2
=====================

- Connection renamed from FSICEBASE to FSICE Emulator Connection

=====================
fsicebase.tgt v6.1.1
=====================

List of New Features
--------------------
- This new target interface allows to connect to the new
  Freescale In-Circuit Emulator Base (FSICE Base)
  development system.
- First release, for HC08.


List of Fixed Bugs
------------------
- none.


List of Known Bugs
------------------
- none.

SYSTEM REQUIREMENTS
-------------------
- The Host PC will need at least 512Mb of physical memory to use the FSICE Emulator
  with the Trace, when the number of recorded frames is high.

Known Problems
--------------
- There is no USB support provided under NT4.0 and consequently no support for 
  interfaces such as the USB BDM/Mon08 Multilink or Cyclone Pro, FSICE Emulator USB 
  MON08 Debug Port on that platform
- The FSICE Emulator USB connection (Emulator connection) is not available under 
  Windows 98. The FSICE Emulator TCP/IP and USB MON08 Debug Port connections are
  avalaible under Windows 98.
- Trace Search and Dump functionality have some known problems when the number
  of frames recorded is high.
- In case the external clips are to be used with EM08MR8, EM08MR32, and 
  EM08QA24 (AS/AZ):
  For the external clips to capture data properly, a wire must be soldered from
  P2.B28 to P2.B31. This change is only needed if external clips are to be used. 
  This is because of a design flaw in those boards; they don't provide the PRU
  with the voltage set forth in the interface specification. 
