Layerscape LS1046A参考设计板

LS1046A-RDB

点击播放视频

产品详情

选择区域:

框图

LS1046A RDB

Layerscape LS1046A Reference Design Board

特征

Processor

  • Four 32/64-bit Arm(R) Cortex(R)V8 A72 CPUs, up to 1.6 GHz core speed

Memory

  • Supports 8 GB DDR4 SDRAM memory
  • Supports double-bit error detection and single-bit error correction ECC (8-bit check word across 64-bit data)
  • Supports data rate up to 2100 MT/s
  • Provides one 288-pin DDR4 DIMM connector
  • DIMM connector supports unbuffered X72 8 GB dual rank
  • SDHC port connects directly to an adapter card slot, featuring 4 GB eMMC memory device
  • One 512 MB SLC NAND flash with ECC support (1.8 V)
  • CPLD connection: 8-bit registers in CPLD to configure mux/demux selections
  • Support two 64 MB onboard QSPI NOR flash memories

USB

  • Two USB 3.0 controllers with integrated PHYs
  • One USB1 3.0 port is connected to a Type A host connector
  • One USB1 3.0 port is configured as On-The-Go (OTG) with a Micro-AB connector
  • One USB2.0 is connected to miniPCIe connector

Ethernet

  • Supports SGMII 1G PHYs at Lane 2 and Lane 3
  • Supports SFP+module with XFI retimers
  • Supports AQR106/107 10G PHY with XFI/2.5G SGMII

PCI Express and SATA

  • Mini PCIe express x1 (Gen1/2/3)card
  • Standard PCIe x1 (Gen1/2/3) card
  • Standard PCIe x1 (Gen1/2/3) card
  • One SATA 3.0 connector

购买选项

  • CNY11,976.82
  • 数量为 1
    • 供货状态: 缺货
Buy from NXP从代理商处购买

文档

快速参考 文档类别.

1-5 / 10 文件

展开

设计资源

选择区域:

设计文件

1 设计文件

  • 印刷电路板与原理图

    LS1046 RDB Design Files Rev C

软件

5 软件文件

注意: 推荐在电脑端下载软件,体验更佳。

支持

您需要什么帮助?